Clear replacement dome cover for AXIS Q61 Series cameras. Q6114-E/15-E Camera not included.

This externally mounted ens kit for D2 and D3 Dotworkz camera housings was designed for all look up cameras. This camera lens kit was specifically designed for the Axis v59 series broadcast cameras, Axis Q61 series look up cameras, and dahua look up cameras. This External Mounted Lens Kit is a  7” lens mounted to the outside of any D Series camera housing adds over 1/2“ of look up range for broadcasting and streaming applications. Compatible with new Axis broadcasting cameras.

Get your Dotworkz Cooldome™ T-Shirt today! These are MEN'S COOL
CREW T-SHIRT from 32 degrees are lightweight knit with a lot of stretch.
Lightly brushed on both sides which gives a soft cozy feel that is
smooth against the body.

BR-Q61 integration kit. Seamlessly integrates the Axis Q61 Series cameras (Q6128-E, Q6135-LE, Q6154-EQ, 6155-E) with Dotworkz D2 and D3 housings. Maintains ingress protection against water, dust, and insects. Best of all, it’s easy to install. Works with all D2 or D3 Camera Housings!

Dotworkz KT-MIC easy to install outdoor audio option for all cameras analog and network based. Directional and adjustable to optimize pick up. Durable waterproof and UV protected. Works in both indoor and outdoor applications. Acoustic backdrop for long range boundary operations. Single cable install no power source needed works on standard 3mm mic input.

Dotworkz DuraView Clear Lens - toughest lens of the market - compatible with both D Series enclosures (D2 & D3)

The Dotworkz Single Outlet Pigtail for 120 VAC Power Accessory (KT-ACSO) easily Installs onto Power Block on all Dotworkz MVP Enclosures. It's a compact power integration solution for wall warts or other step down power supplies. A quick and convenient 3 wire Installation with color coded stranded electrical wires. The KT-ASCO comes pre-tinned for easy and secure clamping into existing screw terminals.

Dotworkz now offers a Sunshield accessory for the S-Type Housing. IN-SUN-ST is a cost effective, filed installable solution to reduce the thermal loading inside the S-Type housing, keeping you security camera and security camera equipment running cooler in direct sunlight. With its streamlined design and ultra clean covering, this new sunshield kit offers an easy to install, cost effective solution to your already stellar S-Type enclosure.

Dotworkz now offers a Sunshield visor accessory for all BASH camera enclosures. AC-AC-VISOR is a cost effective, field install-able solution to reduce the thermal loading inside the BASH camera enclosure, keeping you security camera and security camera equipment running cooler in direct sunlight. With its streamlined design and ultra clean covering, this new BASH Visor accessory offers an easy to install, cost effective solution to your already stellar BASH camera enclosure. In addition to sun protection, the BASH Visor also works as a rain shield keeping either the flat or bubble lens from getting wet during the rain seasons.

Dotworkz EZ Lock Pole Mount Adapter is a feature rich mounting adapter.  Easily secures to poles with a minimum of ¾” diameter. An Angle Correction Plate can be added to correct the angle of the enclosure up to 10 degrees for non plum poles, it also has Component Attachment antenna mounts for adding additional Omni or yogi antennas.

(1)

BR-Q60-E is the Axis Q60 Integration Pro Kit from Dotworkz, for D2 & D3 Housing enables indoor and outdoor versions of Axis Q60 & Q60-E series cameras to be installed into D-Series Housings. Ideal for full integration of many accessories in a single camera housing, such as PoE Injectors or Switches, Mesh or Cellular Radio’s, combined with NVR’s, Network switches, and fiber converters all inside the same housing.

Dotworkz KT-Shield Ballistic Armor Shield is the most durable protection solution to date. Engineered with dual energy absorption system of heavy gauge stainless steel and virtually indestructible thermoplastic, the Mark IV protects against small arms fire such as 9mm, 45 caliber ranges, and all forms of vandalism. The IK10 rated Dura View lens and Vandal Resistant Closure Screws are standard in the KT-Shield Ballistic Armor, and provide the highest rate of protection possible for sensitive cameras and electronic equipment.

The KT-AXPA power & Audio accessory was created to provide a solution for customers who need a rugged yet cost effective solution to power the popular Axis P55 & Q60 cameras on via non-POE source, & capability to add a Microphone via inline 1/8”(3.5mm) Microphone Jack, to easily integrate this camera into Dotworkz D2 & D3 or other brands.

Dotworkz now offers a Sunshield accessory for the S-Type Housing. KT-SUN-ST is a cost effective, filed installable solution to reduce the thermal loading inside the S-Type housing, keeping you security camera and security camera equipment running cooler in direct sunlight. With its streamlined design and ultra clean covering, this new sunshield kit offers an easy to install, cost effective solution to your already stellar S-Type enclosure.

Dotworkz Ballistic Armor Shield Kit for the S-Type Static Camera Enclosure (KT-SHIELD-ST) is the most durable protection solution to date. Engineered with dual energy absorption system of heavy gage stainless steel and virtually indestructible thermoplastic, the Mark IV protects against small arms fire up to 9mm and 45 caliber ranges and all forms of vandalism. The IK10 rated Dura View lens and Vandal Resistant Closure Screws are standard in the KT-Shield Ballistic Armor, and provide the highest rate of protection possible for sensitive cameras and electronic equipment. shield

Dotworkz is excited to release the Nano Mount kit (KT-UBNT-NANO) for all our D Series outdoor camera housings. Engineered for an easy, safe, and professional installation of all Ubiquiti PowerBeam M Series and NanoStation M Series wireless antennas. This new Nano Mount provides the ideal DIY solution in mounting any PowerBeam or NanoStation radio antenna directly onto the D Series security camera housing without compromising the housing itself.

The KT-LSHT Lens Heating Kit 12VDC for S-Type Camera Enclosures combats the cold with the low wattage ring that goes around the camera lens for direct heating to ensure the lens stays fog free and ice free for the camera inside the housing.

The KT-LSHT-24 Lens Heating Kit 24VDC for S-Type Camera Enclosures combats the cold with the low wattage ring that goes around the camera lens for direct heating to ensure the lens stays fog free and ice free for the camera inside the housing.

The Dotworkz Sun Hood Kit for S-Type Static Camera Enclosures (KT-HOOD) is a great add-on kit for all S-Type static camera housings that require a little sun glare protection during sunrise and sunset. This Sun Hood kit provides that much need sun glare protection without obstructing the cameras viewable area.

2" Germanium Lens & Adapter Add-on for S-Type Enclosures (KT-THERM-GE)

The KT-AXPA-S power & Audio accessory was created to provide a solution for customers who need a rugged yet cost effective solution to power the popular Axis P55 & Q60 cameras on via non-POE source, & capability to add a Microphone via inline 1/8”(3.5mm) Microphone Jack, to easily integrate this camera into Dotworkz D2 & D3 or other brands.

This Adapter is used to correct or change angles of the enclosure when mounted to a pole in conjunction with the Dotworkz EZ Lock BR-MPM1

Pole Mount Extended Pack (BR-MPM2)

Dotworkz KT-AV8000 Arecont AV Camera Lens Kit for integrating the Arecont AV 8185DN, AV 8365DN, AV 20185DN and AV 20365DN cameras to Dotworkz D2 and D3 enclosures.

Dotworkz KT-AV2000 Arecont AV Camera Lens Kit for integrating the Arecont AV 8185DN, AV 8365DN, AV 20185DN and AV 20365DN cameras to Dotworkz D2 and D3 enclosures.

Angle Correction Plate for Pole Mount Extended Pack (BR-MPM2-AC)

Dotworkz KT-Shield-10 Ballistic Armor Shield is the most durable protection solution to date. Engineered with dual energy absorption system of heavy gauge stainless steel and virtually indestructible thermoplastic, the Mark IV protects against large arms fire from 9mm to 10 gauge shotgun rounds including all forms of vandalism. The IK10 rated Dura View lens and Vandal Resistant Closure Screws are standard in the KT-Shield-10 Ballistic Armor, and provide the highest rate of protection possible for sensitive cameras and electronic equipment.

Dotworkz KT-Shield-CD Ballistic Armor Shield is the most durable protection solution to date for all Dotworkz D2 Cooldome Camera Housings. Engineered with dual energy absorption system of heavy gauge stainless steel and virtually indestructible thermoplastic, the Mark IV protects against medium arms fire from 9mm to 16 gauge shotgun rounds including all forms of vandalism. The IK10 rated Dura View lens and Vandal Resistant Closure Screws are standard in the KT-Shield-CD Ballistic Armor, and provide the highest rate of protection possible for sensitive cameras and electronic equipment.

The 2017 Stainless Steel Arm from Dotworkz is designed for all S-Type camera housings. This new arm provides the ultimate package with unmatched camera mounting stability, corrosion proof protection for any environment, and theft/vandal protection from all threats. Cable management is made simple, easy, and customizable. The optional power supply can be mounted inside the arm with no additional mounting brackets.

Dotworkz BR-ACC-50 Custom Internal Accessory Component Mounting Plate. The Dotworkz Custom Internal Accessory Component Mounting Plate (BR-ACC50) was originally designed for Panasonic Analog and Network Cameras including broadcast electronics to be mounted inside the D2 or D3 Dotworkz Camera Enclosures.

Dotworkz D2 or D3 Accessory Component Mounting Plate (BR-ACC1)

Dotworkz FireTide Mesh Radio Conversion Kit

The corner adapter designed to work with the Dotworkz D Series housings.

The PSA1 is designed to to the inside or outside of a parapet wall. The arm swings 360 degrees and can be locked in several positions. The swing arm can be rotated ack to the roof for easy servicing of the enclosure.

There is an additional mounting plate at the base to attach accessory components.

The PSA1 is compatible with the Dotworkz D2 which can attach directly to the mounting face plate.

The BR-APM1 Adjustable Base Parapet Mount is for multiple locations. The mount can be located on surfaces that are at odd angles such as pitched roofs, angled soffits or lofted ceilings. The multiple angle articulation simplifies camera aiming and makes the mount simple to install. It is designed to withstand harsh environments and can be customized with a variety of finishes to suit customer requirements. The APM1 is compatible with all Dotworkz D-Series.

The Dotworkz BR-CPM1 Compact Parapet Mount Bracket is designed to be used on roof top parapets.

The CPM1 flat mount surface is compatible with all Dotworkz D-Series.

This Replacement Standoff Pack is the best solution for adding a space or replacing the existing standoff hardware that goes between any IP, HD, CCTV, specialty, or surveillance camera mounted inside a Dotworkz camera housings. The Replacement Standoff Pack (RP-STANDOFFPK) mounts securely on the internal camera bracket inside of all Dotworkz camera housings.

This 5 Port Ethernet Switch Kit is the best solution for adding more network ports inside the Dotworkz D2 or D3 camera housings. The 5 Port Ethernet Switch Kit (KT-HUB5) mounts securely inside all Dotworkz D2 or D3 camera housings.

This PoE Injector 12v Input 24 Watt with Acc Tray is the best solution for adding a 12v input 24 watt PoE injector inside the Dotworkz D2 or D3 camera housings. The PoE Injector 12v Input 24 Watt with Acc Tray (KT-POE-24) mounts securely inside all Dotworkz D2 or D3 camera housings.

This PoE Injector 12v Input 35 Watt with Acc Tray is the best solution for adding a 12v input 35 watt PoE injector inside the Dotworkz D2 or D3 camera housings. The PoE Injector 12v Input 35 Watt with Acc Tray (KT-POE-24) mounts securely inside all Dotworkz D2 or D3 camera housings.