|
|
|
|
|
|
|
|
|
|
|
|
|
|
The D2 Enclosure is made from an impact resistant Polycarbonate Thermal plastic. The D2 is compatible with virtually every IP and analog PTZ camera on the market — Axis, Sony, Panasonic, Canon, Arecont, Acti, Bosch, Vivotek, Toshiba and many more.
|
The D3 Enclosure is made from an impact resistant Polycarbonate Thermal plastic. The D3 is compatible with virtually every IP and analog PTZ camera on the market — Axis, Sony, Panasonic, Canon, Arecont, Acti, Bosch, Vivotek, Toshiba and many more.
|
This is the PTZO-BASE. This is the PTZO-BASE which is generally recommended for indoor use OR temporary outdoor use. This enclosure is ideal for areas where you want to keep the cameras safe from flying objects or potential vandalism. A perfect example would be a school gymnasium. It is also ideal for outdoor setups where you want to keep your cameras protected from potential rain or snow during an event but do not need to permanently install them in an outside location
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The D2 Heater Enclosure is made with an impact resistant Polycarbonate Thermal Plastic. The ultimate barrier between the camera and environmental factors, the Heater-Blower D2 significantly reduces weather-related wear-and tear. It is IP68 rated against dust, water, and salt water air.
|
The Solar Heater/Blower Camera Enclosure protects cameras by using a low wattagea heater “ring” that goes all the way around the camera (360 deg. Horizontal) and is affixed directly to the dome lens having 4 watts of direct heating. This allows the Solar version to keep the lens clear of fogging more efficiently.
|
The D2 Heater & Blower with PoE Enclosure is made with an impact resistant Polycarbonate Thermal Plastic. The ultimate barrier between the camera and environmental factors, the Heater-Blower D2 significantly reduces weather-related wear-and tear. It is IP68 rated against dust, water, and salt water air.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The D2 Tornado Enclosure is made with an impact resistant Polycarbonate Thermal Plastic. Excessive heat can damage cameras. The ultimate barrier between the camera and outside heat, the Tornado D2 enclosure significantly reduces heat-related wear-and-tear. It is IP68 rated against dust, water, and salt water air.
|
The D3 Heater Enclosure is made with an impact resistant Polycarbonate Thermal Plastic. The ultimate barrier between the camera and environmental factors, the Heater-Blower D3 significantly reduces weather-related wear-and tear. It is IP68 rated against dust, water, and salt water air.
|
The IP68 Solar Tornado Camera Enclosure protects cameras by using a low wattage blowing to provide a continuous flow of air around the camera. This allows the Solar version to keep the camera cool more efficiently.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the PTZO-HB. This enclosure has been designed for outdoor use in a variety of environments. The HB in PTZ-HB standards for heater blower which is included inside the unit. This enclosure has been designed for outdoor use in colder environments. The heater blower unit is ideal for removing condensation or fog that can accumulate on the enclosure lens and prevent the cameras from capturing clear video.
|
The Solar Heater/Blower Camera Enclosure protects cameras by using a low wattagea heater “ring” that goes all the way around the camera (360 deg. Horizontal) and is affixed directly to the dome lens having 4 watts of direct heating. This allows the Solar version to keep the lens clear of fogging more efficiently.
|
The D3 Tornado Enclosure is made with an impact resistant Polycarbonate Thermal Plastic. Excessive heat can damage cameras. The ultimate barrier between the camera and outside heat, the Tornado D3 enclosure significantly reduces heat-related wear-and-tear. It is IP68 rated against dust, water, and salt water air.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The IP68 Solar Tornado Camera Enclosure protects cameras by using a low wattage blowing to provide a continuous flow of air around the camera. This allows the Solar version to keep the camera cool more efficiently.
|
The D2 Tornado Enclosure PoE is made with an impact resistant Polycarbonate Thermal Plastic. Excessive heat can damage cameras. The ultimate barrier between the camera and outside heat, the Tornado D2 enclosure significantly reduces heat-related wear-and-tear. It is IP68 rated against dust, water, and salt water air.
|
The D2 Ring of Fire Enclosure is made with an impact resistant Polycarbonate Thermal Plastic. D2 Ring of Fire features patented de-icing/defrosting circuitry that removes snow and ice that would obstruct the camera’s view. Plus, the D2 Ring of Fire housing seals out all moisture, preventing lens condensation and fogging. It is IP68 rated against dust, water, and salt water air.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The D3 Tornado Enclosure PoE is made with an impact resistant Polycarbonate Thermal Plastic. Excessive heat can damage cameras. The ultimate barrier between the camera and outside heat, the Tornado D3 enclosure significantly reduces heat-related wear-and-tear. It is IP68 rated against dust, water, and salt water air.
|
The D3 Ring of Fire Enclosure is made with an impact resistant Polycarbonate Thermal Plastic. D3 Ring of Fire features patented de-icing/defrosting circuitry that removes snow and ice that would obstruct the camera’s view. Plus, the D3 Ring of Fire housing seals out all moisture, preventing lens condensation and fogging. It is IP68 rated against dust, water, and salt water air.
|
The D2 Heater & Blower with 60W High Power PoE Enclosure is made with an impact resistant Polycarbonate Thermal Plastic. The ultimate barrier between the camera and environmental factors, the Heater-Blower D2 significantly reduces weather-related wear-and tear. It is IP68 rated against dust, water, and salt water air. The D2-HB-POE-HP offers 12 VDC @ 60W available for camera powering.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The D3 Heater & Blower with 60W High Power PoE Enclosure is made with an impact resistant Polycarbonate Thermal Plastic. The ultimate barrier between the camera and environmental factors, the Heater-Blower D3 significantly reduces weather-related wear-and tear. It is IP68 rated against dust, water, and salt water air. The D3-HB-POE-HP offers 12 VDC @ 60W available for camera powering.
|
The D2 Cooldome Enclosure is made with an impact resistant Polycarbonate Thermal Plastic. The COOLDOME™ thermo-electric cooling system is engineered for climates where temperatures exceed 105° F (41° C) and reaches as high as 155° F (68° C). It is IP66 rated against dust, water, and salt water air.
|
The D3 Cooldome™ Single Fan Camera Enclosure is made with an impact resistant Polycarbonate Thermal Plastic. The COOLDOME™ thermo-electric cooling system is engineered for climates where temperatures exceed 105° F (41° C) and reaches as high as 167° F (75° C) +. It is IP66 rated against dust, water, and salt water air.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The D2 Cooldome Enclosure is made with an impact resistant Polycarbonate Thermal Plastic. The COOLDOME™ thermo-electric cooling system is engineered for climates where temperatures exceed 105° F (41° C) and reaches as high as 155° F (68° C). It is IP66 rated against dust, water, and salt water air.
|
Dotworkz KT-Shield Ballistic Armor Shield is the most durable protection solution to date. Engineered with dual energy absorption system of heavy gauge stainless steel and virtually indestructible thermoplastic, the Mark IV protects against small arms fire such as 9mm, 45 caliber ranges, and all forms of vandalism. The IK10 rated Dura View lens and Vandal Resistant Closure Screws are standard in the KT-Shield Ballistic Armor, and provide the highest rate of protection possible for sensitive cameras and electronic equipment.
|
The D3 Cooldome™ Camera Enclosure is made with an impact resistant Polycarbonate Thermal Plastic. The COOLDOME™ thermo-electric cooling system is engineered for climates where temperatures exceed 105° F (41° C) and reaches as high as 167° F (75° C) +. It is IP66 rated against dust, water, and salt water air.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Dotworkz D2 Cooldome™ and Heater/Blower (D2-CD-HB) is made with an impact resistant Polycarbonate Thermal Plastic. The COOLDOME™ thermo-electric cooling system is engineered for climates where temperatures exceed 105° F (41° C) and reaches as high as 167° F (75° C) +. It is IP66 rated against dust, water, and salt water air.
|
Dotworkz KT-Shield-CD Ballistic Armor Shield is the most durable protection solution to date for all Dotworkz D2 Cooldome Camera Housings. Engineered with dual energy absorption system of heavy gauge stainless steel and virtually indestructible thermoplastic, the Mark IV protects against medium arms fire from 9mm to 16 gauge shotgun rounds including all forms of vandalism. The IK10 rated Dura View lens and Vandal Resistant Closure Screws are standard in the KT-Shield-CD Ballistic Armor, and provide the highest rate of protection possible for sensitive cameras and electronic equipment.
|
The Dotworkz D3 Cooldome™ and Heater/Blower (D3-CD-HB) is made with an impact resistant Polycarbonate Thermal Plastic. The COOLDOME™ thermo-electric cooling system is engineered for climates where temperatures exceed 105° F (41° C) and reaches as high as 167° F (75° C) +. It is IP66 rated against dust, water, and salt water air.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dotworkz KT-Shield-10 Ballistic Armor Shield is the most durable protection solution to date. Engineered with dual energy absorption system of heavy gauge stainless steel and virtually indestructible thermoplastic, the Mark IV protects against large arms fire from 9mm to 10 gauge shotgun rounds including all forms of vandalism. The IK10 rated Dura View lens and Vandal Resistant Closure Screws are standard in the KT-Shield-10 Ballistic Armor, and provide the highest rate of protection possible for sensitive cameras and electronic equipment.
|
|
|
